(1) The impeller of water ring vacuum pump adopts welding structure according to the minimum absolute pressure of a certain suction.
(2) The shaft seal adopts packing seal. In order to prevent the packing from grinding and damaging the shaft, chrome steel shaft sleeve is used.
(3) The pump body is elliptical structure, made of carbon steel, and can rotate.
(4) The steam water separator is a wear-resistant part of 2be water ring vacuum pump, so it requires good wear-resistant performance.
(5) The side cover is made of HT200. The side cover is equipped with an automatic drain valve to drain the excess water in the pump and make the pump work better. At the same time, the side cover is equipped with an inspection cover plate for inspection Working room conditions.
(6) Bearing components. A cylindrical roller bearing is installed on the driving side and non driving side respectively to bear radial force. A centripetal ball bearing is arranged on the non driving side to bear the axial force.
(7) In order to maintain a constant water ring, it is necessary to continuously supply water to the pump during operation. According to the actual situation of water network, open circulation water supply mode is adopted.
Water Ring Vacuum Pump manufacturers
What is water ring vacuum pump
industrial vacuum pumps,vacuum furnaces
没有评论:
发表评论