Water ring vacuum pump plays a very important role in our life, because it occupies a great position in industry and agriculture, which not only benefits from its simple and easy operation, but also its high efficiency is also an important point. In these applications, it plays the role of vacuum extraction, and the use can be reflected by the water supply, so how to adjust its water supply?
1. Since the water supply of vacuum pump has a certain range, in order to obtain the standard water supply and save water, the water supply valve can be adjusted according to the program. 2. When the water ring vacuum pump operates normally, open the water supply valve properly, and then observe the pressure of the inlet vacuum gauge. 3. Slowly turn down the opening of the water supply valve. When the pointer of the vacuum gauge starts to fluctuate or drop, the water supply is not enough. Open the water supply valve again slowly. When the pointer of the vacuum gauge is stabilized again, the water supply is the standard water supply.
Here we should pay attention to that when the water supply is insufficient, the pumping capacity of the equipment will decrease, and the work will be unstable. If the water supply is too much, it will cause waste of water resources, increase the shaft power of the pump, and even burn out the motor.
CL Sereis Cone Liquid Ring Vacuum Pump
Roots Blowers
Roots Vacuum Pump
没有评论:
发表评论