The use of Roots vacuum pump has very high requirements for cleanliness, because the overall situation is relatively clean, in order to ensure that the gas is not polluted, otherwise it will affect the use of vacuum pump. The pump cavity is also a part of the cleaning process, which must be done well to prevent those dirty things from being sucked in. When cleaning the pump cavity, we must pay attention to:
1. In unclean working conditions, dirt will settle in the pump chamber or rotor of Roots vacuum pump. After removing the inlet and outlet connecting pipe, blow out the dirt with dry compressed air or wipe the dirt with solvent.
2. Can not be blown out by the pump cavity and wipe off the dirt can be wire brush, metal wool or scraper to remove, and then change the oil.
3. During cleaning roots vacuum pump, the rotor must be turned by hand, and there should be no loose sediment in the pump.
4. After cleaning, turn the rotor slowly by hand to see the pump running. They should rotate freely without any resistance.
Note: Roots pump does not need to be disassembled, if necessary, contact the manufacturer to dismantle.
The roots vacuum pump just bought in the process of use, the gas is basically clean, this is because all parts of the pump are well cleaned. Users must also do a good job in cleaning or regularly find the manufacturer to clean for you. If the pump is not cleaned for a long time, then their efficiency will certainly not be very high. When cleaning the pump cavity, be sure not to power on, otherwise it is very dangerous.
Vacuum System In Neutral Beam Injector
Vacuum Pump Used In Automation Equipment
Vacuum System In Ceramic Filter
没有评论:
发表评论