When using the water ring vacuum pump, we should be prepared for energy saving, so as to ensure the service life of the equipment. The following editor will introduce several ways to reduce the power consumption of water ring vacuum pump.
1. For the damage of water ring vacuum pump bearing: the treatment method is to check, repair or replace the bearing.
2. Too high speed: check the driver and power supply.
3. The liquid density of water ring vacuum pump increases: the treatment method is to check the liquid density.
4. Pump shaft bending: the treatment method is to correct the pump shaft.
5. The packing of water ring vacuum pump is pressed too tight or dry friction: the treatment method is to loosen the packing and check the water seal pipe.
6. There is friction between impeller and wear ring, impeller and shell. The treatment method is to check and repair.
7. Failure of axial force balance device: the treatment method is to check whether the balance hole and return pipe are blocked.
8. Coupling alignment is poor or axial clearance is too small: the treatment method is to check alignment and adjust axial clearance.
As long as you ensure that when there is a problem, according to the above methods, you can greatly reduce the power consumption of the vacuum pump, increase the service life of the water ring vacuum pump, and better serve you.
没有评论:
发表评论