SK water ring vacuum pump works

We need to be prepared before we do anything, so is the case with SK water ring vacuum pumps. Before you use it, you need to be well prepared to get twice the result with half the effort.

1. Before we use it, we should check the rotation of the pump shaft of SK water ring vacuum pump to see if it is normal, whether it is stuck or not, and whether the position of the impeller is normal.

2, SK water ring vacuum pump cable and cable plug whether there is rupture, scratching and breaking phenomenon.piston-vacuum-pump

3. In operation, we should pay attention to the change of the pump voltage, which is generally controlled within the range of (+5%) rated voltage.

4. The position of SK water ring vacuum pump in water is very important. It should be selected as far as possible in places with abundant water, no silt and good water quality. Vertical suspension in water is not allowed to be placed horizontally, so as to avoid falling into the mud or blocking the inlet of the pump by suspended solids, resulting in a sharp decrease in water output and even no water can be pumped.

Before we use SK water ring vacuum pump, we must have an understanding of the whole, while we are in production, to the machine first operation, testing, so that we can ensure that the use of the process to reduce abnormal phenomena.