Application Of Vacuum Pump In Concentrator

A machine used to absorb gases under an absolute pressure of less than one atmosphere is called a vacuum pump. The vacuum filter of the concentrator, the large water pump (before starting) all need to use the vacuum pump to extract the air.

A vacuum pump is a compressor that sucks gas out of thin air and drains it into the atmosphere. Generally, the pressure of the gas it absorbs is lower than the atmospheric pressure (the vacuum pump recently made can make the residual pressure in the container be 1 x 10-15 mm silver column), and the gas pressure is slightly higher than the atmospheric pressure.application-of-vacuum-pump-in-concentrator

Vacuum pump also has reciprocating, rotary and so on the distinction, its action principle is the same as above. At present, the vacuum pumps used in the concentrator are wet and dry. The vacuum pump only sucks air out of a certain space (such as the air in a filter) and can pump out 98% of it. The wet air pump sucks the liquid out with the air, leaving only 85 percent of it empty.

In order to keep the water ring of a certain volume and heat out, water must be recycled continuously. In order to supply water to the vacuum pump, a special water tank connected with the discharge pipe is installed. The used water is put into the box with air. In order to avoid the wear on the end face of the blade, there should be no inclusion in circulating water. Otherwise, the wear on the blade will be caused. General wear should not be greater than 0.1 mm.2BE1_series_Liquid_ring_vacuum_pump