Although the operation of water ring vacuum pump itself is not complicated, it can't help but sometimes the pump will be damaged due to improper use, which will cause some problems, such as water leakage of the equipment. I believe that many friends have met it, which will directly affect the production efficiency of the equipment, so what are the causes? What should be done? Let's take a look:
1. Water leakage caused by cracks in pump housing
If the shell cracks and leaks water, you can wipe the cracks clean, and then use adhesive to mend. In case of emergency, cement and egg white can be mixed to form a paste and applied to the crack, which can be used after several minutes of solidification.
2. Water leakage of water ring vacuum pump in operation
If the equipment under operation is found to be leaking water, do not stop it immediately, but keep it at a lower stable speed, and then add water to the cooling system and drain water (Note: when the water filler cap is opened again, a cover should be placed above it, in order to prevent scalding by the water vapor). Make the engine cool down, drive slowly, drive to the nearby concealed place and then drain Except.
3. Water leakage due to shell rupture
In case of water leakage due to breaking of equipment shell or damage of pump internal parts, relevant parts can be replaced according to the actual situation to eliminate the fault.
Through the description of water leakage of the above-mentioned water ring vacuum pump, we can take appropriate measures to solve the problem, so as to avoid affecting the operation of the equipment to a greater extent. In addition, in case of emergency, if the water leakage is not very serious, we can lay a piece of abrasive cloth on the glass plate or flat plate, and then grind the sealing plane flat, or we can also turn the bakelite water seal over and use it again Solve problems in time.
Acid And Alkali Resistant Vacuum Pump
Nitric Acid Vacuum Pump
Natural Gas Decarbonization Vacuum Pump
没有评论:
发表评论