Water Ring Vacuum Pump operation Process

Water ring vacuum pump must have been heard by everyone. Do you know how to operate it? Let Xiaobian tell you next.

1. Preparations before opening water ring vacuum pump

(1) check. Check carefully whether the connection between the parts is good.

(2) open. Open the intake valve of the water tank, fill the water tank to the prescribed water level, and open the suction valve and discharge valve of the water ring vacuum pump.Cheap-good-retail-price-hand-oil-free-manual-vacuum-pump

(3) close down. Close the vacuum whose intake valve and discharge valve.

2. Opening Water Ring Vacuum Pump

When everything is ready, the pump can be started. When the vacuum tank reaches a certain degree of vacuum, the suction valve can be opened and the centrifugal pump can be sucked and pumped. When the oil tank truck is sucked, the operation of the water ring vacuum pump is the same as that of the centrifugal pump.

3. Maintenance of Water Ring Vacuum Pump in Operation

In the operation of pumps, the staff should strictly observe their posts, concentrate their energy, observe carefully and do the following:

(1) Listen to the sound of the pump and motor running at any time.

(2) See whether the vacuum degree, the height of the liquid level of the vacuum tank, the circulating water in the water tank and the lubrication of bearings are normal.

(3) Touch whether the temperature of bearings and motors is normal by hand.

4. Stop Water Ring Vacuum PumpElectric-Rotary-Vane-Air-Conditioning-Vacuum-Pump

(1) First close the suction valve, then open the intake valve of the vacuum tank. Finally stop the pump.

(2) Vacuum vent valve. Close the valve.

Above is the operation process of water-ring vacuum pump, of course, it is also applicable to other water-ring vacuum pumps. When you do the above operation, you must pay attention to safety and close it after use.Factory-Direct-Sale-2BV-Water-Ring-Vacuum-Pump