2BV Water Ring Vacuum Pump Operation

As we all know, vacuum is used in many industries. 2BV water ring vacuum pump is a kind of equipment that can produce vacuum. In order to make the vacuum produced by pump applied in various fields, we must master its operating rules:

I. preparation

1. Start the working fluid supply pump and open the working fluid condenser valve.

2. Check whether the working fluid level is normal. If the liquid level is low, open the tap water valve to make up water.Roots-Vacuum-Pump-for-the-heavy-industry-and-waste-water-treatment

Two, operation

1. Start 2BV water ring vacuum pump and quickly open the intake valve.

2. Adjust the opening of the intake valve. If the noise of 2BV water ring vacuum pump is too loud, the intake valve should be closed down.

3. Slowly open the valve in the vacuum pipeline, and the production equipment can obtain the required vacuum.

4. Check every 30 minutes during operation. If abnormal sound or vibration is found, stop immediately and restart after troubleshooting.Roots-Vacuum-Pump-For-Transformer-Oil-Filtration-Machine

Three, shutdown

1. Close the vacuum tube valve.

2. Close the working fluid inlet valve and quickly close the 2BV water ring vacuum pump.

3. If there is no other water ring pump running, the working fluid supply pump and the working fluid cooler cold water valve should also be closed.

The operation of 2BV water ring vacuum pump has undergone preparatory work, operation, shutdown steps, opening the valve, adjusting parameters, and finally closing the valve after use, so that the pump can stop running and get a full rest.vacuum-furnace-product