No matter whether the water ring vacuum pump is pumping air or water, there should be no leakage. Check the oil seal carefully before use to see if it leaks. Oil seal is a kind of seal often installed in water ring vacuum pump equipment, which has good sealing effect. How to check whether the vacuum pump oil seal leaks?
1. The water level indicator in the vacuum system is not broken or leaking.
2. Close the drain valve on the steam side of the condenser to prevent leakage.
3. Check whether the water ring vacuum pump is under negative pressure, whether the water level of the low pressure heater is normal and whether the drain valve is sealed.
4. Check whether the exhaust steam safety valve of low pressure cylinder is in good condition and there is no air intake.
5. Check whether the gravity return water of the speed control feed water pump leads to the condenser. If the return water volume is small and the water seal bag cannot be sealed, the gravity return water from the sealing water of the water supply ring vacuum pump should be poured into the groove.
6. Check the area connecting the vacuum exhaust pipe and the cylinder for air leakage. When the load drops, the air leakage will be reduced, while when the load rises, the vacuum will increase slightly.
7. If the water seal, pipe, flange or weld of vacuum system valve is not firm, especially the pipe and valve port from expansion tank or boiler start-up separator to condenser.
Water Ring Vacuum Pump
Dry Scroll Vacuum Pump
industrial vacuum pumps,vacuum furnaces
没有评论:
发表评论