2019年11月20日星期三

Anticorrosion method of water ring vacuum pump

Anticorrosion method of water ring vacuum pump

Water ring vacuum pump is used and pumped, so it can pump out inflammable and explosive gas, in addition, it can also pump out the gas containing dust and water, so it is inevitable that it will be corroded after long use, so how should we carry out anti-corrosion operation when we use it? Let's see the introduction of technical points of anti-corrosion first.

1. For the material application of water ring vacuum pump, apply a thin layer of material first to ensure the bonding and full coverage, and then evenly apply the material to the repair surface to achieve the required repair thickness.

2. It is very important to mix the materials when applying the water ring vacuum pump. Mix them strictly according to the proportion and mix them evenly until there is no color difference.


3. Conduct surface treatment for water ring vacuum pump, thoroughly remove the surface oxide layer, and clean the surface with acetone.

The above is the introduction of the key points of the anti-corrosion technology of the water ring vacuum pump. Because it is isothermal in compressed gas, it is widely used, so we should do a good job of maintenance for it. The anti-corrosion is just one of the above, we operate according to the correct methods.
Central Vacuum System For Tray Sealing Machine

Roots Liquid Ring System For Chemical Process

Oil Free Claw Vacuum Pump In Semiconductor Industry

2019年11月19日星期二

Cooler for vacuum pump

Cooler for vacuum pump

In fact, for the work of the vacuum pump, we need to know that when the cooling water volume and temperature of the cooler are insufficient, the cooling water temperature will increase, leading to the reduction of the cooling efficiency. If the excessive temperature is not spread in time, the working fluid temperature will increase, affecting the output. According to our work experience, it is an effective preventive measure to measure the cooling water temperature of the equipment regularly and timely, which can effectively judge the internal state of the water ring vacuum pump and provide reference for the maintenance personnel.

Pay attention to keep the cooler clean at the same time. The vacuum pump adopts plate cooler, and the cooling water is supplied by industrial water, which is affected by different industrial water quality and has different influence on the equipment. When the industrial water quality is poor, it will lead to the fouling of plate cooler, reduce the circulation area of cooling water, thus affecting the overall flow and flow rate of water, resulting in the temperature rise of working fluid. Therefore, the cleaning of the cooler and cooler is directly related to the temperature of the working fluid of the vacuum pump.
VACUUM FURNACE

industrial vacuum pumps,vacuum furnaces

Heat treatment equipment

Internal structure of liquid ring vacuum pump

Internal structure of liquid ring vacuum pump

Now the most commonly used way of vacuum pump on the market is water ring vacuum pump. Compared with other working pumps, this kind of pump has the advantage that some vacuum parts can be formed in its working process, which greatly reduces the energy consumption of machinery. Because the vacuum degree of the pump body is directly proportional to the output degree, when the water ring vacuum pump works, its output efficiency is the highest, achieving the best economy of the unit operation, and ensuring the highest working efficiency.

During the operation of the liquid ring vacuum pump, its main parts work together through the coupling. The main working parts inside the pump body are the moving shaft and the impeller. When the equipment is rotated at high speed and centrifugal force is generated in it, the working fluid stored in it will be continuously thrown to the inner wall to form a section inside the pump body, which is approximately equal to the shape of the pump cavity. Due to the uniform centrifugal force, the thickness of each part of the water ring is approximately the same.
Dry Vacuum Pump In Plastic Industry

Liquid Ring Vacuum Pump

Roots Vacuum Pump

System operation of water ring vacuum pump

System operation of water ring vacuum pump

Don't you know the operation process of the water ring vacuum pump system? Let's explain the working process to you. First, work is done by the condenser. The object of work is the air stored in the equipment to ensure that the internal air pressure of the equipment is lower than the normal atmospheric pressure. The air moving outward enters the vacuum pump when passing through the inlet valve. After filtering structure in the vacuum pump, it is centrifuged Filter. The air and working fluid are separated. The air enters the exhaust pipe through the pipe and is discharged along the exhaust pipe. The working fluid flows back to the inside of the equipment through the special pipe. This is to prevent the working fluid carried by the gas from moving to the outside of the equipment with the gas, resulting in waste of working fluid and excessive resource input.

When the working fluid enters the equipment through the pipeline, ensure that the liquid level in the equipment reaches a stable state. If the water level measured automatically in the equipment does not reach the corresponding standard, the automatic water replenishing valve can be used to replenish water inward to ensure the water level is stable. Since automatic water replenishment is required, the water replenishing valve shall be kept open during the operation of the equipment. This will not affect the water ring positive air pump water cooling and other situations.
Factors Affecting The Quality Of A Dry Vacuum Pump

Rotary Vacuum Pump For Pulp Bleaching

Oil Diffusion Pump Application Technology

What are the types of water ring vacuum pumps

What are the types of water ring vacuum pumps?

The water ring vacuum pump in use has single-stage, multi-stage and single-stage cascade ejector series connection water ring vacuum pump. The two-stage water ring vacuum pump has a higher limit vacuum than the single-stage water ring vacuum pump, and the suction curve drops flat, so it is suitable for the work situation where a larger suction capacity is still needed under a higher vacuum. The two-stage water ring vacuum pump can also be used as a secondary booster pump for high vacuum pumps such as water vapor jet.

The two-stage water ring vacuum pump is a two-stage impeller connected in series on the same shaft, and the main shaft is directly connected with the driving device. There are two modes of operation when the two-stage water ring vacuum pump is used for vacuumizing the condenser in the power station: under the starting condition of low vacuum, the absolute pressure of the condenser and other vacuum systems is 14665.2pa, which can be operated in one stage; under the normal operating condition of high vacuum, the absolute pressure of the condenser is 5999.4pa, which can be operated in two stages.


The serial vacuum pump used in the power station is to connect a ejector to the inlet of the water ring vacuum pump to improve the suction vacuum. The air is used as working medium, which is ejected from the nozzle at high speed. The ejected gas is drawn out, and then enters the water ring vacuum pump, where it continues to be compressed. Finally, the gas and water are discharged out of the tank.

VACUUM FURNACE

industrial vacuum pumps,vacuum furnaces

Heat treatment equipment

2019年11月18日星期一

Design of vacuum system for coating equipment

Design of vacuum system for coating equipment

At present, the vacuum systems used in various vacuum coating equipment are not only of different structures, but also of different pumping characteristics with different working objects

(1) the main pump of the general vacuum system is the oil diffusion pump. The water-cooled baffle (well) is set above the pump. The front pump of the main pump is a mechanical pump. The working pressure of this system is in the range of 10-2 ~ 10-4Pa

(2) in the ultra-high vacuum system, the vacuum degree of the coating chamber can be increased to more than 10-6pa by adding liquid nitrogen cold trap or titanium pump to the above vacuum system, so the ultra-high vacuum system can be obtained. Because the system still uses oil diffusion pump, there is still oil system.

The cwd-500 is equipped with three pole type: cold cathode sputtering ion pump (jlp-400 type) as the main pump, titanium sublimation pump (st-0.1 type) as the auxiliary pump, and sp-40 molecular sieve adsorption pump as the coarse pumping pump. The system is also equipped with CT-200 built-in plug-in valve, a complete set of front stage vacuum pipeline, baking device, etc. in order to make it easy to exhaust or quickly extract air during baking, the unit can also use a set of mechanical pump and adsorption device as auxiliary front stage pump. The ultimate vacuum of the unit can reach 6.7 × 10-8 PA, and it can be pumped to 1 × 10-5 PA from atmospheric pressure within 1h


A very clean vacuum can be obtained by using the molecular pump system of the coating machine, which is conducive to the improvement of the film quality. The pumping speed of molecular pump is very high, which can shorten the process period. For example, 1200L · S-1 molecular pump is used in the ordinary high vacuum coating machine with a diameter of 500mm. It takes only 18min to pump 3 × 10-4Pa from the atmosphere. It can be seen that the effect is remarkable

(3) the vacuum coating equipment of the cryopump system using the cryopump system has a series of advantages: no selective gas, no hydrocarbon pollution, large pumping rate, low limit pressure, simple operation and convenient operation and maintenance
2BE Vacuum Pump Maintenance

Dry Type Oilless Vacuum Pumps

Liquid Ring Vacuum compressor

Vacuum unit in the requirement of thin oil metal metallurgy

Vacuum unit in the requirement of thin oil metal metallurgy

The process of vacuum system obtaining vacuum is called vacuumizing, also called vacuumizing or exhausting. The volume of gas pumped out per unit time under the specified air pressure is called pumping rate, i.e. pumping speed. It can also be called pump speed, and the unit is L / s. The minimum air pressure that a pump or a vacuum system can reach after exhausting for a long enough time is called ultimate vacuum degree

High vacuum condition is required for thin oil metallurgy. Therefore, a complete set of high vacuum unit equipped with mechanical pump and diffusion pump is often used. The vacuum can be pumped to 10-6pa in series with mechanical pump and booster pump. In order to further improve the vacuum degree, the adsorbent can be put in the working system or a cold well can be installed to absorb or condense the gas that has not been pumped out by the pump. Sometimes, the first level mechanical booster pump and unit are added. In series or parallel connection, to improve the pumping capacity in a certain vacuum range.


In the high vacuum unit, the mechanical pump can reduce the air pressure from one atmospheric pressure, which is called the front stage pump; the diffusion pump can only pump from the lower air pressure to the lower air pressure, which is called the secondary pump. The air pressure at which the secondary pump starts to work is called the pre vacuum or pre vacuum. The best pumping speed of each kind of vacuum pump is corresponding to a certain inlet pressure. Therefore, it is necessary to allocate a reasonable vacuum unit in order to obtain the best vacuum efficiency. An unreasonable configuration will not only cause waste, but also cause the vacuum degree of the air system to fail to meet the expected requirements.

The reasonable configuration of vacuum unit should solve the following main problems:

1) select the type of main pump, determine the pipeline and select the vacuum components according to the requirements of the gas volume, working pressure, the limit of the vacuum degree and the pumping time generated by the vacuum equipment;

2) after selecting and matching the main pump, calculate the pumping time and pressure of the vacuum equipment;

3) understand the relationship between the parameters of vacuum pump and the passing capacity of conduit

Vacuum Pump For Pharmaceutical Blister Packaging Machine

Two-Stage Rotary Vane Vacuum Pump For Electroplating Metal Crystallization

Vacuum Application In Adsorbent