Operation Technology of Vacuum Pump Unit

There are various types of vacuum pump units, each of which has its own functional characteristics, but most of the units have the same operation technology, mainly divided into two types: intermittent and continuous. So in order to make you better understand the operation process of the unit, the following is a detailed introduction by Xiaobian for you, let's take a look at it.

1. Intermittent operation process: This operation process relies on manual up-down or back-and-forth swing of the cover, which determines that the size of the vacuum chamber should not be too large. Only when the vacuum cap is closed, the vacuum pump unit will operate, while the other time units will not work. The advantage of this operation mode is to reduce power consumption and noise, but this requires that the quality of the unit must be too hard. If the quality of the unit is not up to standard, the vacuum pumping will be very slow and the vacuum effect is not good for a long time to use. Therefore, customers should not blindly look at the price and ignore its quality when purchasing the vacuum pump unit.

2. Continuous operation process: the cylinder controls the automatic swing cap, and the cylinder provides pressure to the vacuum cap through the vacuum pump unit, so the unit has been in operation, but because the use requirements are strengthened on the board and the whole machine skeleton, the size of the unit is larger than the unit.

Therefore, when using the vacuum pump unit, we can choose more suitable operation technology according to the operation requirements of the unit and the actual conditions of field use, so as to better play the functional effect of the unit, so as to make the operation of the unit more stable and long-term.

Roots vacuum pump

Liquid Ring Vacuum compressor