Skillful Ventilation Process of Liquid Ring Vacuum Pump

The process of reuse of liquid ring vacuum pump can not only speed up the transportation of liquid ring vacuum pump, but also extend its service life. Here we will reveal its ingenious ventilation process for you.

The liquid ring vacuum pump discharges air outwards to reduce the indoor air pressure, and the indoor air becomes thinner. The characteristics of the vacuum pump form a negative pressure zone. The air flows into the room due to the compensation of the air pressure difference. In the practical application of the industrial plant, it is centrally installed on one side of the plant, and the air inlet is on the other side of the plant. The air is convective blowing from the air inlet to the vacuum pump. In this process, it is close to the liquid. The doors and windows near the annular vacuum pump remain closed, forcing air to flow into the workshop by compensating the doors and windows on the side of the intake port. The air flows into the workshop in line and orderly from the intake port, flows through the workshop, and is discharged from the workshop. The ventilation is thorough and efficient, and the ventilation rate can be as high as 99%. Through the specific engineering design and the design of ventilation speed and wind speed according to the needs, any high-heat, harmful gases and dust smoke can be quickly discharged from the workshop. Any poor ventilation problem can be thoroughly solved once and for all, and can be reached within a few seconds from the opening of the station.

Dry-Screw-Vacuum-Pump-in-Sewage-Treatme

Dry-Screw-Vacuum-Pump-in-Pharmaceutical-Industry

vacuum-exhibition

the-choice-of-vacuum