imported vacuum pump filter element

The filter element of the imported vacuum pump is the filter equipment in the vacuum pump and an important working part of the filter. The filtering effect is mainly determined by the performance of the filter element. So how to maintain and maintain the filter element of imported vacuum pump?

First, there are three main types of filtration in the operation of imported vacuum pumps:

1. Intake filter element: It can effectively prevent solid particles and fine ash from being sucked into vacuum pump. Reduce mechanical wear and improve operational reliability. While prolonging the service life of the pump, it can also effectively protect the system components.

2. Exhaust filter element: Considering exhaust resistance, dust capacity and oil-gas separation performance, the three requirements achieve the optimal balance. Different internal and external locations need different materials to achieve different separation purposes.

3. Oil filter element: Lubricant filter for imported vacuum pump, mainstream filter for prolonging the service life of oil, installed in the oil circuit.

2. Use and maintenance of filter element of imported vacuum pump:

1. Release the knob bolt to separate the filter housing from the head. Be careful not to lose rubber and fibre gaskets.

2. Carefully remove the spring and felt gasket, and then remove the paper core.

3. Clean the dust and foreign matter in the fold of the filter core with a brush, then gently pat it flat with your hand to make the remaining dust fall, wipe off the dust on the inner wall of the shell and the dust on the fibre mat.

4. Loading the cleaned or new filter core back in reverse order when disassembling.

KF-Bored-Weld-Flang

KF-Sockent-Weld-Flange

KF-Half-Nipple