1. The liquid ring vacuum pump cleans the foreign matter gathered in the pump chamber every month, such as opening the valve in the discharge pipeline in a short time or opening the blockage of the discharge wire in a short time.
2. If there is excessive scale accumulation in the work of the liquid ring vacuum pump, then the liquid ring vacuum pump should be rinsed once every certain time (usually 5-10 days). The rinsing time should be first rinsed with a suitable solvent (10% oxalic acid, alcohol, etc.), and then rinsed with water.
3. All filters and filters installed on the pipeline must also be cleaned or replaced periodically (once a month).
4. The next cleaning cycle must be determined according to the scaling in the exhaust chamber of the liquid ring vacuum pump or the blockage of the filter in the pipeline during the first inspection.
5. When cleaning with compressed gas, you must wear personal protective equipment (such as goggles, masks, etc.) and discharge the exhaust gas through designated pipelines. When using chemical cleaning materials, attention must be paid to the warning and guidance in the relevant safety materials. Chemicals must be compatible with the materials used. Attention should be paid to the possibility that chemicals may corrode the parts in the pump.
Cleaning the liquid ring vacuum pump is not only to maintain its cleanliness. It is also because in the cleaning process can check whether there are any problems with the equipment, can be timely maintenance. This allows the equipment to work at its best.
High-efficiency-energy-conservation-roots-vacuum-pump
Easy-to-carry-direct-rotary-vane-vacuum-pump
Single-stage-oil-sealed-rotary-vane-vacuum-pump
Water-Ring-Vacuum-Pump-for-Petroleum-industry
没有评论:
发表评论