1. The elevation of the bottom plate of the pump room of the vacuum pump: when the pump is stopped, the water level of the collecting pool is lower than the central axis of the sewage water pipe by 1m, and the water depth is set to 2m, so the pumping floor floor height is 23.30m.
2. Set 4 submersible pumps in the pump, the pump distance is 3m, and the pump room length is 20m.
3. It should be composed of machine room and collecting basin. The width between machines is 4.2m, and the width of collecting water is 4.3m.
4. The machine is divided into 2 compartments. One HZPN-II 1.5m*1.5m cast iron plate gate is set, and the trash net is set at 2.5m from the side wall.
5. The length of the collecting well is 20m, the width is 4.3m, the water depth is 2m, the effective volume is 172m3 (not counting between machines), and the pumping capacity is more than 127m3 for 5min of single pump.piston-vacuum-pump-structure
6. Set 2 SV064B submersible slurry pumps in the catchment, 1 for use, and the vacuum pump is placed in the dirt collection pit with a ground elevation of 20.75m.
For the vacuum pump, the pump room setting is very important. If there is no pump room, the vacuum pump can't work, so we should understand the above knowledge.liquid-ring-vacuum-pump-for-vacuum-drying
没有评论:
发表评论