liquid ring vacuum pump Installation

The liquid ring vacuum pump is the main equipment to change the running form of the fluid, so it can be seen in many production. It can be used alone or in conjunction with other equipment. So how to complete its installation in order to better guarantee its use effect in actual use?liquid ring vacuum pump manufacturer

liquid ring vacuum pump Installation process :

1. To transport the liquid ring vacuum pump to the site, the first thing is to find the flat roof, at this time, according to the need to put the pump and motor.

2. When the foundation is installed, wedge-shaped iron is padded near the anchor screw, and the top pad is about 20-40 mm. The water ring pump is used to fill the cement slurry before leveling.liquid ring vacuum pump application

3. Check the level of pump roof with water ring pump level instrument, fill the roof with cement slurry before leveling, and check the level again after the cement slurry is done.

4. Clean up the dirt on the support plane of the roof, pump foot and motor foot, and put the pump and motor on the roof.

5. Adjust the level of the pump shaft, tighten the nut properly before leveling, and use the water ring pump to prevent moving. When the adjustment is finished, install the motor first, pad the iron plate at the water-incompatible place, and keep a certain gap between the pump coupling and the motor coupling.water ring vacuum pump applicable industry

6. Place the ruler on the coupling to check that the axis line of the pump and the motor can coincide. If not, place thin iron sheets under the foot of the motor or pump to make the outer circle of the two coupling equal to the ruler. First, take out the thin iron sheets with many sheets of gaskets, replace the iron sheets with the created iron sheets, and re-examine the situation.

7. The shock absorber is directly placed between the isolation platform and the support structure, and generally does not need to be fixed.

8. Check the installation roughness of the water ring pump and measure the clearance between the two coupling planes with a plug ruler in several opposite positions.water ring vacuum pump in thermal power plant