Water ring vacuum pump is a kind of coarse vacuum pump. It has compact structure, reliable work balance and uniform flow, and is used for conveying inflammable and explosive gases. It has been widely used in people's production and life. Therefore, it is also loved and respected by users. However, when people install and use water loop pipes, they are often unable to start because of lack of professional guidance and relevant knowledge. Because water-ring vacuum pump is used to transport and inhale flammable and explosive gases, the correct installation of water-ring vacuum pump is very important to transport safety.
Reasonable Pipeline Scheme
1. The turning of the pipeline should be smooth transition.
2. Valves should be installed in the intake pipeline of water-ring vacuum pump to regulate the amount of water intake. The amount of water intake has an effect on the vacuum degree. When regulating the amount of water intake, the valve is controlled by observing the pointer of the vacuum meter.
3. The shorter the distance between the outlet of the vacuum system and the inlet of the pump, the better.
4. The fewer pipeline turns, the better.
5. The inlet pipeline should be higher than the central line of the pump inlet, and the outlet pipeline should avoid the factors that cause greater resistance, such as climbing up the outlet pipeline, right-angle turning, etc.
6. The diameter of the fitting pipe should be the same as that of the product. If the vacuum system is small, the diameter of the fitting pipe can be small, but not less than 70% of the diameter of the product, and the diameter of the outlet pipe should be greater than or equal to the diameter of the inlet pipe.
没有评论:
发表评论