Water ring vacuum pump is widely used because of its convenient operation and high production efficiency, so it has been widely concerned. In order to better use the equipment, it is very important to regulate its operation. First, how to start correctly is very important. Let's take a look at the following:
1. Close the gate valve on the intake pipe.
2. Start the motor. Pumps are mechanical seals, so the mechanical seals should be watered before starting the motor.
3. Open the valve on the water supply pipe, or supply water directly to the pump with tap water, so as to gradually increase the water supply until the water supply meets the requirements.
4. When the water ring vacuum pump reaches the limit vacuum or high pressure, it opens the valve in the intake pipeline and the equipment starts to work normally.
5. To adjust the packing cap, the situation of water droplets dropping out is better.
6. The air-water separator is adjusted by the valve to supply water to the pump in order to operate under the required conditions, so that the power consumption can be reduced and the working requirements can be met.
7. Adjust the water supply to the gas-water separator of the water supply pipe, and use the small water consumption as far as possible, so as to ensure the technical specifications required in the water ring vacuum pump.
8. When the pump works under the limit pressure, explosion may occur due to physical action, but the power consumption does not increase. At this time, the valve on the gas pipeline can be opened to let a small amount of gas in.
Nowadays, with the increasing use of water ring vacuum pumps, there are many manufacturers in the market. Xiaobian reminds us that in addition to selecting the right type, it is also important to select the right manufacturer, so that the quality of products can be guaranteed.
没有评论:
发表评论