How does the stone production line block dust pollution

Because of stone crusher is not fully closed, at work, being hit by extrusion, stone, stone clearance of air is extruded and high-speed outward movement, lead dust with escape, instantly raise large amounts of dust. The dusty air passes down through the chute (a few) or through the feeding mouth (most), causing a high concentration of dust around the feeding mouth. Being in this state for a long time will not only cause serious pollution to the environment, but also cause great harm to the human body. So how to control the dust pollution of the crusher, as a professional broken equipment manufacturer, which aspects should we improve?vacuum furnace

(1) close control will seal the dust source with a sealed cover to make the dust not spread widely.vacuum furnaces

(2) eliminate highly potential difference handling equipment hopper, shield, chute, etc for powder, high potential difference generated by the difference of the main causes of spillover is the dust float in the sky, try to reduce the gap, reduce the chute chute inclination, some secret chamber caused by negative pressure best closed, such ability for dust collection.

(3) the wet dust removal and exhaust dust removal according to the reasons of the dust, dust source can be set respectively control countermeasures: in the feeding mouth and tape transshipment point setting spray device, and to control the amount of water wet stone, can significantly reduce the crushing plant transfer point inside the dust pollution; When the reprint point, especially when the underground construction of the underground building is bad, the centrifugal fan should be used, the ventilation should be forced and the wind speed and air volume should be enhanced. When the dust is produced by the operation of the tape, the negative pressure control system of the cloth bag filter is adopted to control the dust source.
vacuum tempering furnace vacuum oven