How to do all kinds of work of sand and stone crushing production line?

How to do the work of gravel crushing production line, every day when we turn on production, we should first check the broken pieces of sand and stone for a few minutes.Compact Split Tube Furnace with Vacuum Flanges Quartz Tube

See if there is a good lubrication bearing, the connection in the bearing seat, and whether there is enough grease to check all the fastening is completely fixed.
6/10Bar Vacuum Gas Quenching Furnace For Titanium Alloy
The belt is good, and it is found that the marked crusher should be replaced in time, with a belt or pulley grease, a clean cloth to wipe his application and; The protective device is good.The working principle of water ring vacuum pump

If the protection device is found to be unsafe, it should be cancelled immediately. Whether ore crushing chamber or other feeding machine sundries, such as ore, or other debris, should be cancelled.

vacuum pressure sintering furnace

The crusher is recommended to be checked before the crusher is started, which proves that the mechanical transmission part is normal. The machine is permitted only under load conditions.Mini Titanium Nitri e PV Coating Machine

After starting, if abnormal conditions are found, the operation should be stopped immediately, the abnormal situation must be identified and eliminated, and then the crusher is started again.AC 220v Piston Vacuum Pump Low Pressure Electric Pumps